
Field guide · Rivell
Emerging weapon detection technology: Wi-Fi, millimeter wave and standoff
New sensing approaches promise screening without lanes, at a distance, or using signals already in the air. Here's how they work, where they stand, and what to ask before you pilot one.
7 min read
Last reviewed: November 2026
Illustrative image
Key takeaways
Imaging and stand-off systems can detect non-metallic objects but typically cost more and have different operating constraints. Wi-Fi sensing is early and largely unverified independently. Thermal and other camera-based approaches are active research areas. Evaluate maturity, evidence and privacy before deploying.
The landscape at a glance
DHS's 2024 market survey grouped walk-through weapons screening into metal detection systems (active and passive) and imaging systems. Of the five imaging systems it covered, two were portals that actively generate millimeter waves, and three operated in a stand-off configuration with no portal — two using passive millimeter-wave sensing of the body's thermal radiation and one using active non-imaging radar. Prices provided for four of the five imaging systems ranged from $80,000 to $300,000, compared with $5,000 to $19,000 for four of the ten metal-detection systems with prices provided. [S4]
Those categories are a useful starting point, not a recommendation for a particular building. Metal detection and imaging ask different questions of objects and use different sensing principles. Begin by identifying the category, then examine the operating model and evidence for the proposed use. A stand-off approach should not be assessed as though it were simply a lane with a different shape.
The reported prices are historical survey information, not a Rivell price list or a current quote. They illustrate why equipment category belongs in a cost discussion, while a site-specific comparison still needs preparation, integration, staffing and support. Use the survey to frame questions and verify current information with each manufacturer.
Millimeter wave portals (active)
Active millimeter-wave systems direct electromagnetic energy at a person and analyze the reflections; because detection is based on reflective properties rather than conductivity, they can detect metallic and non-metallic objects while people keep moving. [S4] Considerations: cost, footprint, single-direction traffic flow for some imaging systems, and throughput in your environment. [S4]
Ask how the proposed portal fits the entrance and the direction people travel. Ask what objects and size classes are covered by its evidence, and how an alert is presented and resolved. The ability to detect non-metallic objects does not remove the need to understand limitations and staffing.
Compare the complete entrance design rather than a detection principle alone. Footprint, traffic flow and the secondary process should be part of the same evaluation. The right question is whether the proposed configuration works with your people and procedures, not whether imaging sounds more advanced than another category.
Stand-off and passive millimeter wave
Passive millimeter-wave systems sense the thermal radiation naturally emitted by the body; objects under clothing block or alter that emission, which can be flagged without a portal, from a distance. [S4] DHS notes most passive MMW systems are not expected to reveal objects inside parcels, and inspection depends on field of view and stand-off distance. [S4] Stand-off sensing can extend awareness to approaches and queues, typically as a complement to entry screening rather than a replacement.
Define the area you want to observe and ask how field of view and distance affect that use. Keep bags and parcels in the conversation rather than assuming the same sensing covers everything a visitor carries. If the proposal complements an entry lane, define the role of each layer and how alerts reach trained people.
A system without a portal still has an operating model. Ask who monitors the output, who assesses an alert and what happens next. Coverage at a distance is not the same thing as a completed screening process. It needs an understandable connection to entry procedures and response.
Wi-Fi sensing ("Wi-AI")
Wi-Fi sensing uses radio signals in Wi-Fi bands and AI models to infer the presence of objects from how signals reflect and pass through people and bags. StateScoop reported in November 2025 that CurvePoint.ai, a Carnegie Mellon spinout, began deploying such a system at entrances across a Pittsburgh-area school district; the company said it was optimized for guns, was working on smaller items, and had not yet been independently audited, while the ACLU raised accuracy and civil-liberties concerns. [S8] Treat Wi-Fi sensing as emerging: promising for discreet coverage, but ask for independent evaluation before relying on it.
Separate what the company says from what an independent evaluation has established. Ask which objects, placements and operating conditions are supported by evidence, and which remain development goals. Do not turn the promise of discreet coverage into a claim that the system meets every entrance need.
A pilot should have agreed acceptance criteria and a clear privacy discussion. Ask what information is collected, how it is handled and what people are told about the screening process. Emerging technology deserves careful evaluation rather than either automatic enthusiasm or automatic dismissal.
Thermal and camera-based research
Researchers are also exploring thermal cameras combined with deep learning. A 2025 peer-reviewed study in the Journal of Imaging presented a two-stage thermal-imaging approach and a custom dataset for concealed weapon detection. [S9] Academic results are valuable signals of direction, but lab performance is not the same as a validated product in a busy entrance.
When reviewing research, keep the study and the proposed deployment distinct. Ask what the research demonstrates and what still needs to be evaluated in the intended setting. A dataset and an academic approach are not, by themselves, a complete entrance screening and response program.
Camera-based research also belongs in a different discussion from visual gun detection. The latter looks for visible firearms on video, while concealed sensing research addresses another question. Avoid combining the categories under a single camera or AI label when deciding what evidence to request.
How to evaluate any emerging technology
Start with maturity: is the proposed use a pilot or a fielded deployment? Ask for independent testing and applicable standards. For millimeter wave, DHS notes standards work such as IEEE draft standards and, at the time of its report, no U.S. standards for passive millimeter-wave systems. [S4] Be precise about what standard is being cited and what it evaluates.
Ask what the system detects: metallic or non-metallic objects, and which size classes. Ask about throughput, field of view, distance where relevant and the operating model. The evidence should match the proposed use rather than a different configuration or a broad category claim.
Review privacy, data handling and integration with your security systems. Compare total cost and staffing, and agree a pilot with acceptance criteria. The criteria should make clear what success means for your entrance and which limitations the wider program must manage.
Keep the comparison disciplined. A new sensing principle may address a different need from a controlled lane, so compare the actual roles each option would play. The evaluation should answer whether the technology fits the site, how trained people use its information and what remains outside its coverage.
Where Rivell stands
We implement Motorola Solutions Concealed Weapons Detection, powered by Evolv, because it is a fielded, integrable solution for controlled entrances today. We follow emerging technologies closely and will tell you plainly when something else, or something additional, is a better fit for your site.
Start with your entrances and risk, then choose the role technology should play. A site survey makes the operating constraints and integration needs concrete. Emerging sensing can be part of that conversation without replacing the demand for evidence, clear procedures and honest expectations.

Request a site survey
Start with your entrances, your people and a practical plan.
