Skip to content
Complete CWD Guide guide illustrative entrance and technology scene

Field guide · Rivell

Concealed weapon detection: the complete guide

Everything a school, hospital, venue or workplace needs to understand before choosing a concealed weapons detection system: how the technology works, what it can and cannot do, how it is measured, what it takes to operate, and how to evaluate it at your own entrances. Every technical claim on this page links to a public source.

13 min read

Last reviewed: November 2026

Illustrative image

Our disclosure

Rivell is an implementation partner for Motorola Solutions Concealed Weapons Detection, powered by Evolv. Product details on this page are drawn from the cited public sources.

Key takeaways

Concealed weapon detection is a sensor plus a process, not a guarantee. Detection, discrimination and throughput trade against each other. Judge systems on evidence for your threat set and entrances, budget for staffing and support, and pilot before you commit.

What concealed weapon detection is (and is not)

Concealed weapon detection (CWD) means screening people at an entrance for weapons hidden on the body or in carried bags. DHS describes modern walk-through screening systems as able to detect concealed mass-casualty weapons carried by attackers without significantly impeding pedestrian flow, and notes they can also deter would-be attackers. [S11] Unlike high-security checkpoints where people remove bags, coats and metal objects, these systems are designed to screen people without stopping. [S11]

What CWD is not: it is not a guarantee, and it is not a decision-maker. A concealed weapons detection system is a sensor that draws a trained person’s attention to a specific visitor, and often to a specific area of the body or bag. The outcome depends on entrance design, written policy, staffing, training and what happens after an alert. CISA recommends a written screening policy that is applied uniformly. [S3]

It also helps to separate CWD from neighboring categories that buyers often confuse with it: visual gun detection (camera analytics that look for a visible firearm), gunshot detection (acoustic sensors that react after shots are fired) and experimental standoff methods such as Wi-Fi sensing or thermal imaging. Each answers a different question at a different moment. See our comparisons of concealed vs. visual gun detection and emerging weapon detection technology for that distinction in depth.

The three numbers that define any system

DHS’s SAVER program defines the capability of walk-through weapons screening systems with three interdependent parameters: detection (the probability of detecting a threat object of a specified size), discrimination (the ability not to alarm on non-threat objects) and maximum recommended throughput (the rate at which the system performs those functions). [S4]

They trade against each other. DHS explains that a higher sensitivity setting may improve detection of smaller threat items but also alarms on more non-threats, which lowers effective throughput because people must divest items and staff must resolve the alarms. A lower setting may mean fewer false alarms and higher throughput but may miss smaller items. Many systems therefore offer adjustable sensitivity so the operator can match the setting to the application. [S11]

This is the single most useful idea for a buyer. Any claim about detection, nuisance alarms or people-per-hour is meaningless without the other two numbers and the setting it was measured at. Ask for all three, for your threat set, in writing.

  • Detection: probability of detecting a specified threat class at a stated sensitivity setting. [S4]
  • Discrimination: which everyday items the system is designed not to alarm on. [S4]
  • Throughput: the maximum recommended screening rate, and the staffing assumption behind it. [S4]

How the technology works: metal detection vs. imaging

DHS groups today’s walk-through screening products into two technology families: metal detection and imaging. Metal detection systems use the conductive and magnetic properties of metal to find potential threat objects; imaging systems reveal concealed objects by their reflective or thermal properties relative to the body. [S4]

Active metal detectors generate a magnetic field between two panels or towers; a metal object moving through the field has a current induced in it, which creates its own field that the receiver measures. Passive systems (magnetometers) rely on the earth’s magnetic field instead. [S4] DHS notes that ferromagnetic metals produce stronger signals, while non-ferromagnetic metals such as copper, aluminum, zinc and brass are difficult for most passive systems to detect, and some stainless steel grades produce weaker signals in walk-through metal detectors. [S4]

Many systems localize a detection to a zone of the body. Among the products DHS reviewed, systems offering zonal detection ranged from 4 to 66 zones, typically shown to the operator on the portal or a screen. [S4]

Imaging systems use millimeter waves. Active millimeter-wave systems direct energy that penetrates clothing but not the body and can reveal objects under clothing; privacy-preserving systems typically show the operator a generic body outline rather than the person’s image. Passive millimeter-wave systems sense the body’s natural thermal emission and operate as standoff devices at a distance. DHS notes thermal infrared cameras, by contrast, see surface temperature rather than through clothing and are not typically used for weapons detection. [S4]

Where AI fits

“AI weapons detection” usually means software that classifies sensor signals to separate likely threats from common items. DHS describes Evolv Express as using AI-powered signal analytics together with magnetic signatures to differentiate alarms, and as designed to discriminate items such as cell phones, keys and coins. [S4]

AI does not change the physics underneath. An AI-assisted metal-based system still senses metal; it is the classification and alert presentation that change. That is why evidence matters more than the label. Our AI concealed weapons detection page explains what the term can and cannot mean in practice.

A closer look at the platform Rivell installs

Rivell designs, installs and supports Motorola Solutions Concealed Weapons Detection, powered by Evolv. Motorola Solutions introduced the solution through an agreement with Evolv Technology in 2021, and alerts can be sent into the Avigilon video platform so security teams see video alongside the alert. [S1][S2]

The underlying Evolv Express platform is documented in DHS’s September 2024 SAVER market survey. [S4] The points below are taken from that report and describe the manufacturer’s published configuration; your site survey determines what applies at your entrances.

  • Experience: designed to let guests walk through at a natural pace without stopping to hand over belongings; image-aided alarms show staff where a potential threat is on the person or in the bag. [S4]
  • Configurations: single-lane or dual-lane; indoor passage width of 32 inches with the standard mat or 40 inches with the wide mat. [S4]
  • Detection principle: active continuous-wave metal detection in the extremely low frequency range, with magnetic signatures and AI-powered signal analytics used to differentiate alarms. [S4]
  • Settings: six pre-programmed sensitivity levels on the standard-width model and seven on the wide model. [S4]
  • Throughput: manufacturer-stated maximum of 1,800 people per hour per lane (standard width) or 2,000 (wide width), assuming enough staff to resolve alerts without a backup. [S4]
  • Environment: rated for indoor and outdoor use with IP56-rated components and an operating range of −4 °F to 131 °F; setup from storage takes about five minutes. [S4]
  • Integration: an open API for third-party VMS and security operations alert tools, out-of-the-box integrations listed for Genetec and Milestone, and a dry-relay interface for access control. [S4]
  • Data: visitor arrival and alarm rates by entrance, date and time are available through Evolv Insights for staffing and post-event review. [S4]
  • Privacy: integrated cameras capture images of people who cause alerts; alert images are sent to and stored in the cloud only if the customer administrator consents, with a seven-day default retention. [S4]
  • Accessibility: listed as ADA-compliant for all configurations except the outdoor model with the standard-width mat. [S4]
  • Procurement: price varies by model; DHS lists the platform on GSA schedule 47QSWA18D003K, with a standard four-year subscription and rental options through partners. [S4]

Standards and independent evidence

DHS identifies ASTM F3566-22 as the primary standard public safety organizations can use to define requirements for active walk-through metal detection systems, and notes that older NIJ walk-through metal detector standards are superseded by it, although some manufacturers still cite them. [S4][S5][S6] DHS also reports that, at the time of its review, no U.S. standard was found for passive walk-through screening systems. [S4]

Standards conformance is useful, but it is not the same as evidence for your environment. Ask which standard or independent evaluation supports each claim, which portions apply, what threat class and setting were tested, and what the system can miss. The DHS SAFETY Act program maintains a public search of approved technologies if a vendor cites a designation. [S10]

People, process and staffing

Every screening system requires people. DHS notes that while a portal itself may need one operator, a screening lane may require three or more staff: one to guide people through, one to operate, and one to perform follow-on screening when an alert occurs, plus any additional security personnel. [S11]

Effective throughput is set by the whole lane, not the portal: arrival peaks, how bags are handled, where secondary screening happens, and how fast alerts are resolved. Plan the entrance first, then size lanes and staff to the busiest realistic arrival window. Our guides to event venue screening and touchless weapons detection walk through lane design in detail.

  • Written screening and refusal policy applied uniformly. [S3]
  • A defined secondary screening area out of the main flow.
  • An alternate screening option and clear signage for people with medical implants or accessibility needs. [S4]
  • Training for operators, secondary screeners and supervisors, with practice scenarios.
  • A review cadence that uses alarm and arrival data to adjust settings, staffing and layout.

Privacy, cybersecurity and procurement rules

Connected screening systems are part of your security network. DHS notes that some systems link to building security systems, send alerts to a security operations center or access control, and require firmware or software updates, and it recommends following the FBI CJIS Security Policy and CISA cloud security best practices so software, hardware and cloud applications are implemented, maintained and backed up securely. [S4]

If public grant money is involved, check procurement rules early. DHS summarizes the federal Section 889 prohibition, under which costs for covered telecommunications and video surveillance equipment and services from specified companies, including Hikvision and Dahua, are unallowable for grant funding. [S4] DHS also lists walk-through screening under FEMA Authorized Equipment List reference 15SC-00-PPSS, “Systems, Personnel/Package Screening.” [S11]

State rules matter too. For example, New York schools are prohibited from purchasing or using facial recognition technology. [S19] Our New Jersey, New York and Pennsylvania page summarizes the school and healthcare programs most relevant to our region.

Where concealed weapons detection is used

DHS describes walk-through screening as suited to soft-target locations such as transit hubs and event venues that may otherwise have relaxed security, and notes some products are easily transportable for temporary events while others are set up at venue entrances or integrated with building infrastructure. [S11] Each setting changes the design problem:

  • K-12 schools: predictable arrival peaks, backpacks and instruments, community communication and student privacy. [S12]
  • Colleges and universities: many buildings, events, residence halls and open campuses.
  • Hospitals and healthcare: emergency departments, clinical overrides, patients with implants, and workplace violence programs. [S13]
  • Stadiums, arenas and event venues: very high peaks, bag policies, outdoor lanes and temporary deployments.
  • Corporate offices: lobby flow, visitors and integration with access control and video.
  • Government buildings and courthouses: accessible entrances and existing screening procedures.

What it costs: the drivers, not a sticker price

There is no honest single price for concealed weapon detection. DHS reports that price varies by model and that the platform Rivell installs is offered by subscription, with a standard four-year term that includes hardware, software and support, and with a purchase-subscription option and rentals for infrequent events. [S4]

The bigger cost driver is usually operations: the number of lanes needed for your peak, the staff to run them, secondary screening space, network and integration work, training and ongoing tuning. Our pricing and total cost of ownership page breaks those drivers down so you can budget before you talk to vendors.

How to evaluate a system before you buy

Start with your risk assessment and entrances, not a product demo. Define the threat classes you are screening for, the doors that will be screened and how unscreened doors will be controlled. Ask every vendor the same written questions and compare the answers side by side.

Then test where it will live. A structured pilot at one real entrance, with acceptance criteria agreed in advance, tells you more than any brochure: real nuisance alarm sources, effective throughput at your arrival peak, staffing needs and how visitors respond. Our pilot and evaluation guide lays out a step-by-step plan, and the buyer’s checklist gives you 30 questions to ask.

How Rivell implements concealed weapon detection

Rivell is the implementation partner: we plan, install, integrate and support Motorola Solutions Concealed Weapons Detection, powered by Evolv, for organizations in New Jersey, New York and Pennsylvania, with projects nationwide. Every engagement follows the same sequence: site survey, design, install and integrate, acceptance testing and procedures, training, go-live and tuning, and ongoing support.

Sometimes the honest answer from a site survey is that the right fix is a change in entrances, policy, cameras or access control rather than more screening lanes. Our job is to tell you which. If you are evaluating concealed weapon detection, start with a site survey.

Questions about this topic

What is the difference between concealed weapon detection and a metal detector?

Traditional walk-through metal detectors and many modern concealed weapons detection systems both sense metal. Modern systems are designed to let people walk through at a natural pace with most everyday items in place and to localize alerts for a targeted secondary check. Both rely on the same detection, discrimination and throughput trade-offs. [S4][S11]

Can concealed weapon detection find every weapon?

No. No screening technology can guarantee detection of every threat. Performance depends on the threat class, sensitivity setting, placement, staffing and ongoing tuning, which is why systems should be one layer in a broader security program.

Does concealed weapon detection use X-ray or radiation?

The platform Rivell installs uses active electromagnetic sensing in the extremely low frequency range, not X-ray imaging. [S4]

How many people per hour can a concealed weapons detection lane screen?

It depends on staffing, bags and alarm resolution. DHS lists a manufacturer-stated maximum of 1,800 people per hour per standard-width Evolv Express lane, assuming enough staff to resolve alerts without a backup. Your effective rate will be lower if alerts or bag checks are frequent. [S4]

How many staff does a screening lane need?

DHS notes a lane may require three or more people: someone to guide visitors, an operator, and someone for follow-on screening, plus other security staff as needed. [S11]

Is concealed weapon detection used outdoors?

Some systems are. DHS lists Evolv Express as suitable for indoor and outdoor environments, with outdoor installations recommended to be anchored to the ground. [S4]

Rivell front office in Sewell, New Jersey

Request a site survey

Start with your entrances, your people and a practical plan.

Request a site survey